Loading... Please wait...

Categories

Our Newsletter


QSC RMX 5050

QSC RMX 5050
  • QSC RMX 5050
RRP:
$3,999.00
Your Price:
$3,599.00 (You save $400.00)
Ask a Question
Book a Demo
Brand:
QSC
Shipping:
Free Shipping
Quantity:
Bookmark and Share

Product Description

RMX 1600W/CH @4 OHMS AMPLIFIER

The RMX Series amplifiers from QSC offer true professional-quality performance at an affordable price. Four 2-rackspace models range in power from 430 to 1200 watts per channel at 2 ohms. Two 3-rackspace models provide 2000 to 2500 watts per channel at 2 ohms. All six models feature a compact chassis less than 16" deep. RMX amplifiers include a comprehensive set of features including XLR and 1/4" balanced inputs, Speakoní«Œ© and binding post outposts for convenient connectivity. User-defeatable clip limiters and selectable low frequency filters optimize sonic performance.

FEATURES
- Compact size--up to 2400 watts in 2 rack spaces
- Professional quality performance--incorporates road-proven QSC designs
- High-current toroidal transformers for greater two-ohm power and low noise
- Independent user-defeatable clip limiters reduce distortion
- Balanced 1/4 inch (6.3mm) TRS, XLR and barrier strip inputs
- Binding post and Neutrik Speakon outputs
- Front mounted gain controls for easy access
- Signal and Clip LED indicators to monitor performance
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers

SPECIFICATIONS
RMX 5050

í«í_STEREO MODE

(Both Channels Driven)

 í«í_
8 ohms
í«í_í«í_FTC 20 Hz - 20 kHz, 0.1% THD
í«í_í«í_EIA 1 kHz, 0.1% THD
1050 W
1100 W
4 ohms
í«í_í«í_FTC 20 Hz - 20 kHz, 0.1% THD
í«í_í«í_EIA 1 kHz, 0.1% THD
1600 W
1800 W
2 ohms
í«í_í«í_FTC 20 Hz-20 kHz 0.1% THD
í«í_í«í_EIA 1 kHz 1% THD
2000 W
2500 W
í«í_BRIDGE MONO MODE í«í_
8 ohmsí«í_í«í_FTC 20 Hz-20 kHz 0.1% THD
í«í_í«í_EIA 1 kHz 0.1% THD
3200 W
3600 W
4 ohms
í«í_í«í_ EIA 1 kHz 1% THD
5000 W
Distortion (SMPTE-IM) Less than 0.02%
Distortion (Typical)
20 Hz - 20 kHz: 10 dB below rated power
1 kHz and below: full rated power
Less than 0.02%
Less than 0.02%
Frequency Response

 20 Hz - 20 kHz, 8 ohms, LF filter bypassed, +0/-1 dB
5 Hz - 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dB
Damping Factor Greater than 250 @ 8 ohm
Noise (unweighted) 100 dB below rated output (20 Hz - 20 kHz, 8 ohm load)
Input Sensitivity 1.42 Vrms for 1050 watts into 8 ohms
Voltage Gain 64x (36 dB) for 8 ohm load
Input Impedance 20k ohm balanced, 10k ohm unbalanced
Controls Front:
Controls Rear:

 AC power switch, Ch. 1 and Ch. 2 gain control
10-pole DIP switch featuring LF filter on/off, LF filter 30/50 Hz, Clip Limiter on/off controls for each channel and switches for selecting Stereo, Parallel, or Bridge mode. Push-button circuit breaker for each channel.
Indicators

 Power-On: Green LED, Protect: Red LED
Signal -30dB: Yellow LED, Clip: Red LED
Connectors Input:
Connectors Output:		 XLR female, TRS (1/4"), and barrier-strip screw terminals, each channel
Binding posts and Speakoní«ŒÂ outputs (Ch. 1 Speakon wired for biamp)
Cooling Continuously variable-speed fan, rear-to-front air flow
Amplifier Protection

 Short circuit, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads
Load Protection On/off muting, DC fault output crowbar
Power Requirements 100, 120 or 240 Volts AC (í«Œ±10%) 50-60 Hz (factory configured)
120V models require 20 Amp service and are supplied with a NEMA 5-20 plug on the cordset.
Dimensions 19" (48.3 cm) wide, 5.25" (13.3 cm) tall, 15.9" (40.39 cm) overall depth
Weight 75 lbs (34.02 kg) net, 87 lbs (39.46 kg) shipping



All Specification Subject to Change Without Notice.

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Customers Who Viewed This Product Also Viewed

Free Shipping

You Recently Viewed...